Hobbywing XRotor MicroCube FC & 45A 4in1 BLHeli32 6S ESC Combo

HW38040300

This new 4-in-1 ESC is designed for competition FPV racing - small in size and loaded with features. This combo set is also including the matching XRotor Micro-F4-G2 Flight Control unit.

Features:

• High performance 32-bit microprocessor with the running frequency of up to 48MHz for excellent performance. 
• BLHeli_32 firmware is the third generation BLHeli, following base BLHeli and BLHeli-S.
• All codes use damped light mode. Damped light does regenerative braking, causing very fast motor retardation, and inherently also does active freewheeling.
• The code supports features to prevent sync loss. There are tunable parameters that can make the code run well even in the most demanding situations, although default settings will work 
• excellently in normal operating environments.
• The code supports regular 1-2ms pulse width input, as well as Oneshot125 (125-250us), Oneshot42 (41.7-83.3us) and Multishot (5-25us). 
• Dshot signaling is supported at any rate up to at least Dshot1200. The input signal is automatically detected by the ESC upon power up.
• The code also supports a beacon functionality, where the ESC will start beeping after a given time of zero throttle. This can be very useful for finding lost crafts.
• On board 10V &5V BEC , powering different accessories such as FC , VTx ,Camera and LED lights and etc.
• Firmware: Hobbywing_XRotor_BLHeli_32 Version
• ESC Programming: BLHeliSuite32
• Stick Programming: Supported
• DEO: Supported
• Throttle Range Calibration: Supported
• Oneshot125 Mode: Supported
• Oneshot42 Mode: Supported
• MultiShot Mode: Supported
• DShot150/300/600/1200: Supported
• Timing: Supported
• Motor Rotation: Supported

ESC 4in1 Specifications:

• Applications: 130-300mm FPVs
• Size: 32.7 x 18.4 x 6.2 mm
• Mounting holes: 30.5 x 30.5 mm
• Weight: 11.5g
• Cont./Peak Current: 4x 45A / 4x 60A
• Input Voltage: 3-6S LiPo
• BEC output: 5V@1.5A & 10V@1.5A
• Input Wires: 12AWG 130 mm
• Output Wires: No wires but solder tabs
• Input Connectors: XT60 (w/ Wires Soldered on)
• Output Connectors: No

XRotor Micro-F4-G2 Flight Control Unit Specs:

• Compatible with (Multirotors): Quadcopter
• Firmware: OMNIBUSF4SD
• FC Programming: Supported
• Programming via: Betaflight / Cleanflight-configurator or Others
• Compatible with (Modes): PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300, Dshot600, DShot1200 & Proshot1000 etc
• Compatible with (Transmitters): PPM, Spektrum, SBUS, SUMD, SUMH, XBUS, IBUS, JETIEXBUS, CRSF & SRXL etc
• OSD: Built-in
• Voltage Monitoring: Supported
• Current Monitoring: Supported
• External Buzzer: Supported
• LED Control: Supported
• BEC: No
• USB Port: MicroUSB
• Size: 36 x 36 mm
• Mounting holes: 30.5 x 30.5 mm
• Weight: 6g
• Applications: 130-300 mm FPVs